Tag Archives: Beer

Thomas Coopers Heritage Lager #2 – Review

While Mikey has been quite good with his updates lately, especially with his ongoing Journey to Home Brew story, I have been quite slack.  We hadn’t done a proper brew in a couple weeks (I did bottle the Friedlieb Porter last weekend though), and I’ve just been generally busy/worn out.

Anyway, I got through all of that and had a weekend of home brew!  Not only was a hopped cider AND a stout made, but we also managed to bottle some brown ale, and the remainder of the lager, plus we tried four brews that are finally ready for drinking.  Mikey will be writing up the stout brew and reviewing two of the beers, I’ll write up the cider and reviewing the other two.

So, rather than one huge update with all of this, I’ll be trickling the updates out, starting with the review of the Thomas Coopers Heritage Lager here.

Mikey and I both got the same starter kit that came with the same can of Thomas Coopers Heritage Lager.  We made my can first and followed the directions to simply add a kilogram of dextrose to the wort.  While the beer turned out fairly OK, it wasn’t the most amazing thing either of us ever had.  So since Mikey had the same kit, we decided to try it with some malt rather than dextrose.

All in all, the addition of the malt made for a much better, more well rounded beer.20130707_151143

The beer was a fairly standard lager: there was nothing that stood out or was of any amazing interest.  The body was quite good though, there was a nice finish, and quite a lot of fragrance.

On the nose, there was a ton of fruit and a bit of sweetness.  This fruit continued on the first impression of the taste.  It was almost a passion fruit taste, but without the typical sourness associated with passion fruit.  With this was also the distinct taste of melon.

The beer had very little bitterness to it.  In my opinion, the addition of some bitterness would have been beneficial.  While the fruit was a lot of fun and made the beer light and easy to drink, that’s all there was to it.  With the addition of some bitterness, the dominant fruit flavours would hopefully have been countered, adding a little complexity to the beer.

On that note, the beer tapered off quite quickly after that.

Overall, the beer was simple, but very easily drinkable.  A lager can be difficult to rave about or go to deeply into.  They generally lack complexity and this beer was no exception.  I’ll happily continue to drink it though!

-Chas

Tagged , , , , , , ,

Journey to home brew – Part 2, The Challenges

This is the second in a group of posts on how I got involved in home brew. It follows up from part 1. This second part outlines where my beer appreciation took a big step up.

After drinking a lot of lager for many years the discovery of beer with flavour was like a breath of fresh air. What was to follow was like a hurricane.

Ian introduced me to a pub in Melbourne called Mrs.Parma’s. They are famous for two reasons: a big range of parmas, and having only Victorian beers. The only mainstream beer they had on tap was Carlton Draft (earlier this year they finally removed that as well!). All the other 15 taps had craft beer.

It was back in early 2011 that the first challenge was born. After another, somewhat regular, visit to Mrs Parma’s there was a story shared about one of Ian’s friends who ate 99 parmas in one year. What? 99? Surely he could of had just one more and hit 100. Hey, that’s less than two a week. We could do that! That’s a good idea, let’s do that.
And so, with that, the parma challenge started. Target was to eat 100 parmas in 365 days. Photo evidence required. Review strongly recommended. Any other information, like “out of five” score or cost, great to have.
At the end there were three of us who made it: Ian, his wife at the time, and me. I topped the list with 143.

The parma challenge started in Feb 2011 and finished in Feb 2012. As we got to the end of 2011 we started thinking about what we could do for the next challenge. As big fans of Mrs Parma’s we thought about their other offering, beer. Hey, next year is a leap year as well. Maybe we could do something about 366 days. One a day? Is there that many beers?

So we started looking. Where there that many beers made in the world? Okay, looks like that’s not a problem. Could we get at least 366 of those beers in Melbourne? Looks like it.

The rules were debated back and forth. Would it be one beer every day? Or seven in a week, allowing to cram in seven beers over a couple days and rest for the rest? How would we provide evidence of having the beer? How about some sort of “good” side to the whole thing?
Rules were agreed as follows:

  • One beer every single day. No excuses.
  • Photo evidence required with the date. Bottled beer has to be open/beer poured into the glass. Tap beers need to have the tap or description/name included.
  • Review is required. To include beer name, brewer, percentage of ABV (alcohol by volume).
  • No home brew. Beer has to be commercially available.
  • No ginger beer.
  • No cider.
  • For every beer $1 to go to the charity of your choice.

A test run was done in December. It went quite well.

Each month was going to have its own theme: Australian beers for January (Australia Day), American beers for July (Independence Day), German beers for October (October Fest), and so on.
Halfway through January it dawned on Ian and I that there was a crazy amount of Australian beers out there. We were discovering about one new brewery every day! Quickly we both agreed to stuff the themes and try to have Australian bees for the whole year.

Wow. What a year. 366 Days of Beer was a big success.
Technically I was the only one to completed the challenge successfully. Both Ian and I had holidays overseas. I packed my Australian beers in my luggage (which required a reshuffle of items to keep us under the weight limit). Ian was away for nearly two weeks and posted them over. They didn’t turn up. On returning to Melbourne he did two a day to catch up.
Leah was the other person to do the challenge properly. Major dental work took her out for a week and by end of year there were a few other days missing.
Ian put his reviews up on his blog. Mine are going up slowly on mine.

Throughout the year collectively we tried over 600 Australian beers from most of the Australian breweries. Despite that there were many beers, and even some breweries, missed. What was definitely gained was a much greater appreciation of beer, and a deeper understanding of what we do and don’t want in a beer.

-Mikey

Tagged , ,

Journey to home brew – Part 1, The Beer

I mentioned in one of my first posts that there is story behind how I ended up wanting to home brew. Over the next few weeks I’ll share that story with you.

Unlike the stereotypical Aussie male, I didn’t get into drinking beer for a long time. I grew up in a household where wine was by far the first, second, third, forth and fifth choice of drink. Oh, and there was tea. The focus on wine was so important that family holidays tended to be based around visiting wine regions. At home there was a good small range of spirits, but no beer.

It wasn’t until the end of my first year of Uni that I really started drinking beer. I only had a few beers here and there in my first year Then I went on an Archaeology dig in Cyprus for two months from start of November to end of December. The wine was horrible. The spirits weren’t akin to paint stripper. And beer was amazingly cheap, especially when you return the empty bottles. There was a lot of beer consumed.
After that, there were many Archaeology digs where beer was the drink of choice. I remember one dig at Port Arthur in Tasmania. We worked out that between a small group of us we drank about a pallet of beer in three weeks!

Apart from that, beer still wasn’t my first choice when going out, or staying in, for a drink. I wasn’t excited about the stuff. Every beer tried seamed to be pretty much the same, mass produced tasteless lager.

Over a period of 8-9 years I would slowly learn about things other than lagers. Guinness, Kilkenny, Coopers and Mountain Goat were some of the first adventures into non-lager beers. Little Creatures and some of the more obscure ones would pop up from time to time.

A turning point for me was the very first Harvest Picnic at Werribee Park, maybe 2005 or later. There were a few micro breweries with stands, including Grand Ridge and Red Duck. It was here that I tasted for the first time, and feel in love with, Red Duck’s Golden Dragon, a Celtic ale.

Then in 2008 on holiday in Europe I met up with a friend in Bristol and discovered the amazing world of real (English) ales.

The following year I met a guy through work who was originally from England. Ian would become a great friend. Over the next couple years we would discover the wonderful range of quality beers in Australia.

-Mikey

Tagged , ,

Summer Citrus Blonde Ale – Review

So the Summer Citrus Blonde Ale that we made a few weeks ago is done!  Once again, this one was from the guys at BrewSmith.

This beer was ready to drink pretty quickly.  Being a blonde, it was OK to drink without letting it condition for too long, although leaving it the bottle for awhile probably wouldn’t hurt it either.  It was a lovely light beer, so conditioning it longer wouldn’t have been of much benefit anyway.

First impressions on the aroma were great, albeit subdued.  The main thing that came out in the smell was citrus with a little bit of alcohol; although it’s possible my nose got a little confused and it was just the citrus.  Hunting for it, there was a bit of a smell of malt, but more of a lager smell than anything (although this beer was an ale).  Going further, there was the slightest hint of caramel, probably still from the malt.20130616_154041

As I mentioned, it was very light in feel, although not thin at all.  There was a good amount of body to it.  The citrus, which was dominant but not overpowering, gave everything a crispness that made the beer refreshing and not heavy at all.  Although lemon zest was used to give these flavours, it was definitively a general citrus feel rather than just lemon.

The citrus really cleared my head with every sip, making it extremely refreshing.  I was surprised at how much the coriander came through as well.  I was also surprised that I enjoyed the coriander!

Although the beer was not overly hopped, there was a slight amount of bitterness that interacted well with the citrus.  The hops gave no fruit or spice.  Some fruit would have been welcome (although not needed), although spice would have been inappropriate.

Being such a light beer, I’m sure this would be highly sessionable.  I didn’t get the alcohol content from Mikey, but maybe he’ll enlighten us in the comments.  I suppose the only problem I had with my tasting was that it was done during one of the coldest weeks we’ve had in Melbourne so far this year!  Having one (or five!) of these on a hot summer’s day would be no problem at all.

If I would change anything at all, I would probably add a little more bitterness to further compliment the citrus.  That, or a little more fruit in the aroma would serve the beer well.

As for food, a light BBQ (chicken perhaps) would be great, or something with a bit of spice.  The main thing I’d recommend though is steamed crab, especially with ample amounts of Old Bay seasoning.  That would be the way!

-Chas

P.S. I also had one of the malted ciders I made awhile ago.  It turned out great!  My house mate went crazy for it and stole the whole glass when I offered her a taste of what would have been my second bottle…  I’ll give one to Mikey to do a proper review of later.

Tagged , , , , , , , ,

Blondes and Browns, big brew day

Sunday was another brew day at my place and it was big, in many ways.

Newcastle Brown Ale

Newcastle Brown Ale ingredient list and instructions

First up was a trip for supplies from Australian Home Brewing, aka Liquorcraft, aka Brewcraft, aka something-something. We have done a fair few porters lately. They are pretty awesome and good over the colder months, but time for something else for the cold. An English brown ale was what I wanted. Ended up with a Newcastle Brown Ale kit, plus a basic stout kit for another day.

Then back in the Mikey mobile (aka ‘car’) and back to brew headquarters (aka ‘home’) for brew day.

First order of business. Bottle the lager. Final gravity was 1.012 which means the beer will only be 3.8% alcohol, after bottle conditioning. That’s a fair bit lower than what I was going for. Rather than just a cup of dextrose we should if put in half a kilo. That aside, the sample we took was quite promising. Should be a good session beer.

We have been having some over carbonation in a couple of my beers. Nothing horrid, but the IPA and coffee porter (only a couple sample bottles) have overflowed when opened if shaken even slightly. I’ve been using caster sugar for priming and a few people have suggested this might be the reason. That said there’s not a lot of info on the internet about different types of cane sugar. To test this I primed some bottles of the lager with caster sugar and others with carbonation drops. Had a mix of different bottle sizes as well.

After bottling the lager it was time to start brewing. Cracked open one of the Summer Citrus Blonde Ales and got stuck into it. Chas is going to get a review up soon, so I’ll leave it to him.

The brown ale was a mixed kit. There was chocolate malt (200g), a can of light liquid malt, a can of Nut Brown Ale, some Fuggles Hops, and Safale S-04 yeast.
The malt was left to steep for about 45 mins rather than the 20-30 recommended. Mainly because we were trying to do to much at once.

Chas got the liquid light malt in a pot and brought it to the hot break. And I cleaned the fermenter. Hops were added with the steeped grains. The recipe said an optional 400 grams of brown sugar could be added. Only had 300, but it went in. I finally finished cleaning the fermenter just in time for the fresh wort to go in. Last was the can of Nut Brown Ale. Like the lager, we found the liquid a bit to hot. Was a lot more manageable this time round. Finally, yeast went on and airlock.

  • Black Rock Nut Brown Ale – 1.7kg
  • Black Rock Light Liquid Malt – 1.5kg
  • Crushed Chocolate Malt – 200g
  • Soft Brown Sugar – 300g
  • Fuggles Hops pellets – 15g
  • Safale S-04 yest – 11.5g

Have to say that this was a bit of a hectic brew day. Started late and had a huge amount to do. Tried to do too many things at once. Even spilt some of the strained hops back into the fermenter. Luckily it wasn’t much.

The wort smelt great. Gravity reading was only 1.045 which is a bit below what I would expect for the style. Hopefully this yeast brings the final reading right down. Anything less than 4.5% and I’m going to be disappointed. So, a final gravity from about 1.012 or lower will be good.

-Mikey

Tagged , , , , , , , , , , , , , ,

Yeast!

Howdy!

I thought it would be good to talk about yeast: the magic little organism that turns sugars into alcohol through the process of fermentation.

I won’t go into the fermentation process, but if you’re curious, the Wikipedia articles are quite easy to follow.  Fermentation in general can be found here – this article is not specifically about alcohol fermentation, but explains the process in general.  Alcoholic fermentation information can be found here for further reading.

Yeast in general:

Really, you can use any kind of yeast for fermentation, even regular baker’s yeast bought at the super market, but the various brewing yeasts are specifically designed for taste and alcohol tolerance.

On that note, it is possible to kill your yeast if the alcohol content of your brew gets to high.  At this point, you can’t really get anymore fermentation going because even if you add more yeast, that will probably die too!  Then you’re left with a half fermented beer that still has lots of sugars in it, which would probably taste quite interesting, but not in a good way.  Don’t worry too much though, it’s easy to track down yeasts that will be good well into the high teens/twenties on alcohol percentages; these are generally wine making yeasts.

If you’re making a cider or anything with fruit, it’s also possible to use the wild yeast that naturally grows on fruit peels.  In fact, my mother uses this to make home made vinegar: her most interesting concoction was a banana vinegar!  The problem with using wild yeast is ensuring that it’s only the wild yeast that goes into your wort (or juice if doing cider) and not other bugs that will mess up your brew.  I have yet to attempt this, but it may be fun!

Yeast and temperature:

Yeast is pretty resilient, so if it gets too cold, you won’t kill it.  It just gets a bit sleepy and slows down a bit.  You can even freeze yeast if you want to preserve it.  This means that even if your wort gets a bit cold, things will keep working, just more slowly.  Although this isn’t too bad, be aware that if your wort is in the fermenting tub for too long, sediments may begin to taint the taste of your beer.

On the other side though, if your yeast gets too hot, it will probably die, just like anything else.  So although heat will help speed up the fermentation process, there is a point where you won’t get anymore benefit and the heat will actually be detrimental.  Make sure your wort is at specified temperatures before pitching your yeast.

Experimenting with yeast:

Of course it’s easiest to simply buy yeast from your local home brew supply store, but experimenting with different kinds of yeast can be a bit of fun.  The different strains that you can buy at a good home brew supply store have different characteristics for taste, optimal temperature, and alcohol tolerance.  This means that you’ll use a different yeast for different kinds of beers.

For example, there are specific kinds of yeast for ales, lagers, and wines.  With the few cider experiments I’ve done, I’ve always used an SN9 wine yeast and been happy with the results.  As it’s not desirable in a cider/wine, this type of yeast doesn’t leave any taste behind.  Sometimes you want some of that taste in your brew, and you can generally find a yeast that will do that for you.

That’s it on yeast for now!

 

-Chas

Tagged , , , ,

“The Friedlieb” Coffee Porter – first trial

Friedlieb Runge was a German chemist and the first person to isolate caffeine. Because of this, it’s only appropriate to name our ongoing coffee porter experiment after him!

As much as we liked the Brewsmith porter kits we did (we’re still waiting to see how the coffee version turned out), they’re only sold with enough ingredients to make about four litres – so what do we do when we want to make a big batch? Adding to that, they are a bit expensive when compared to sourcing the ingredients directly. Don’t get me wrong on this. The price of the Brewsmith kits is quite fair, but if you’re willing to take the time to try and recreate their recipes, you can save a bit of money. If you’re not willing to take the time to recreate the recipe, then hey, keep buying the kits because they do a great job.

Anyway, as a base, we used a recipe presented by the great Craig of Craigtube. If you haven’t checked this guy out yet, do it! We weren’t able to get all the ingredients here in Australia, plus we didn’t want to use a canned wort with bittering hops in it, so there was some improvising.

20130609_182318

Since this was the first attempt, it was only a 4 litre batch.

The recipe and ingredients we went with was as follows:

  • 580 grams light liquid malt extract
  • 90 grams dark dry malt extract
  • 90 grams dark crystal
  • 50 grams chocolate malt
  • 40 grams peated malt
  • 50 grams melanoidin malt
  • 60 grams rye malt
  • 3 grams Willamette hops (bittering)
  • 3 grams Fuggles hops (taste)
  • 3 grams Fuggles hops (aroma)
  • 8 shots expresso
  • 1 cup brown sugar
  • Windsor style ale yeast

Steep the grains (using a grain bag) in about two litres of water for 20 minutes (on reflection we probably should have done 40…). When this is done, remove the grains and sparge them with a litre of boiling water.

Bring this three litres up to a boil and throw in three grams of Willamette hops for the start of your thirty minute total boiling period. At the 15 minute mark, put in three grams of Fuggles hops. Finally, with five minutes remaining, put in another three grams of Fuggles.

At the end of the thirty minute boil, turn off the heat and put in the eight shots of espresso as well as the brown sugar and give it a good stir. Put a lid on the pot and immerse it in a sink of cold water for twenty minutes, changing the water halfway through.

Throw this all into a five litre carboy, and top up with one litre of water. Try to get the temperature to between about 18 and 26 degrees with this top up.

Pitch the yeast and you’re done!

Other Notes

We got a gravity reading of 1.054, so we’re expecting an alcohol content of somewhere in the mid 4% range after bottle conditioning; I imagine the final gravity will be a little high due to the yeast type as well as the coffee, which isn’t fermentable but adding to the specific gravity.

In relation to hops, I found that the Willamette had bitter and dry smell with a hint of spice. The Fuggles were less bitter, with a more fragrant fruity/floral smell.

While the wort was boiling, the chocolate was quite overpowering when right over the stove, the smokiness came out quite a bit when I stood back. There weren’t any big hops smells, but when tasting the wort, they were definitely there and quite nice.

Overall, this should be a pretty good brew. We’ll see if it’s anything at all like the Brewsmith kit, but it should taste good any how.

-Chas

Tagged , , , , , , , , , ,

Moving, from small to big

Back when I started looking into home brewing I didn’t know where to start. In my first post I talked about the two types of beer kits I got. I started with the smaller, and slightly more complex kit from Brew Smith. The beer was good, really good. So I stuck with it and made a few more.

Finally time came to do the other kit. The bigger kit. The simpler kit. And I’m worried about the quality. Chas picked up exactly the same kit and the lager turned out rougher than I would have liked.

To try and make sure my version turns out a bit better I decided to replace the dextrose with some liquid malt. Got some advice at Aussie Home Brewers and picked up some Light Pilsner Malt Extract.

The brew was done on Sunday the 2nd and went pretty smoothly. A little too much heat, which wasn’t a huge problem as I really wanted a good original gravity and had to play around a bit. The gravity reading wasn’t exactly where I wanted it, so a cup (75 grams) of dextrose was thrown in at the end.

First few days the beer has been fermenting away as expected. Has slowed down the last 4-5 days and plan to bottle this weekend.

-Mikey

Tagged , , , , , , , , ,

Bottling the dark ale and other updates

Hi!

We had a busy day today.  Mikey came by and we bottled the Dead Guy Dark Ale I made two weeks ago.  We got 61 bottles in total and a final specific gravity of 1.012.  This should give us an alcohol content of about 4.4% once bottle conditioning is finished.  Since it’s a dark beer, I want to give it at least three to four weeks before trying it.  Home brewing is a waiting game…

My 61 new friends!

My 61 new friends!

The hops profile calmed down a little bit, which was good because I wasn’t crazy about it when it was just wort.  I think once the beer is given some time to condition in the bottle, it should turn out pretty well.  Hopefully things will all settle together and add some complexities and body to the brew.

After bottling, we also brewed up a porter, but I’ll do a separate post on that later.

In other news, we’ve also created two new sections.  The first one is Wildly Inaccurate Facts About Beer.  To counter this, we’ve also added a section called Wildly Accurate Facts About Beer.  The topics of these sections are pretty self explanatory.

That’s about it for now!

-Chas

Tagged , , , , , , ,

Buying in bulk

If you’ve taken a look at the Rules Of Home Brew you’ll have seen my advice about always having plenty of consumables such as bottle caps on hand.

Well, I took my own advice and bought this!

Yep, that's 1000 caps

Yep, that’s 1000 caps

I needed more bottle caps because Mikey and I will be bottling the the dark ale this weekend, and it just made financial sense.

Basically, as with anything, the more you buy, the cheaper it is, so buying 1000 caps is quite affordable. I would have got more sanitiser and sugar, but I’ve got plenty of that.

Adding to that, I was already shopping on line for some home brew supplies. Mikey and I have had some good luck with the BrewSmith kits, so we’ve decided to try and replicate one using our own recipe. We’ll be brewing that this weekend, and I’ll post the recipe then.

Unfortunately in my big online order, I forgot to include yeast! I have some spare yeast floating around, but it’s not the right kind, so I’ll have to pop down to my local home brew store before brew day. I’m not going to do a whole mail order just for a little bit of yeast…

Funny though, I was speaking to a friend about my horror at forgetting the yeast, and, since my friend isn’t a nerd, he didn’t know about all the different types of yeast and the importance of using the correct one.  Needless today, he now knows plenty!

Anyway, I’m pretty excited about my caps! I’m going to split them with Mikey so that we both get cappy goodness.

-Chas

Tagged , , , , , ,